产品介绍

CBG-H

 

一、Introduction:

CBG-H is an encapsulated oxidizer for use as a delayed release breaker of water-based fracturing fluids. The delayed release allows higher breaker concentrations to be used without compromising the proppant transport capability of the fluid . CBG-H can be used at bottomhole temperatures from 60℃ up to 107℃。Used to oxidize the gel polymer, destroying the polymer chains and , reducing viscosity to allow flowback of the stimulation fluid while leaving the proppant  in the fracture.Can be directly substituted for persulfate breakers currently used above 60℃。

 

二、Advantages

Minimizes the early effect of the breaker on the fracturing fluid and allows higher breaker concentrations to be used without compromising proppant transport capability.

Since it is a solid breaker, it will be concentrated in the fracture and not lost to the formation during fluid leak-off.

Improves fracture conductivity by enhancing fluid clean-up

 

三、Index：

Items	Index
Appearance	White granular solid
Density (30℃，g／cm3)	1.72
Bulk density kg/m³	897～1025
Active ingredient	70～75%
Temperature             range	60℃ to 107℃

 

四、Usage:
1 the amount of commonly used is: 0.5 ~ 10pptg (0.06 ~ 1.2 kg/m3)

2Pre-job break tests ate recommended to determine the optimum concentration of CBG-H.

 

五、

Packing:

    1. Package: 50 pounds of fiber barrel.

    2. Transport: during transport, care, and to avoid damage.

    3. Storage: Storage ventilation to prevent exposure to date, since the production of the storage period of two years.